Top sellers

Specials

McIntosh MT10 Turntable

Print

mt10

New

Precision Turntable

  • Belt drive
  • Moving Coil cartridge
  • Illuminated speed meter

More details

$ 31,999.00

In-Stock At Supplier

MT10-Angle.ashx

MT10

Precision Turntable

  • Belt drive
  • Moving Coil cartridge
  • Illuminated speed meter

With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable.

Cartridge Specifications

  • Cartridge Type
    Moving Coil, Low Output
  • Output Level
    0.5 mV at 5 cm/s
  • Load Impedance
    400 to 500 Ohms recommended
  • Frequency Response
    20Hz to 50kHz
  • Channel Separation
    Greater than 30dB at 1Khz
  • Compliance
    6 x 10-6cm/dyne
  • Recommended Tracking Force
    2.4 g
  • Channel Difference
    Less than 0.3dB at 1kHz
  • Total Mass
    11 g
  • Stylus
    Elliptical Diamond
  • Cantilever Material
    Aluminum

Tonearm Specifications

  • Bearing
    Sapphire and Ceramic
  • Arm Tube
    Dural-Aluminum
  • Counterweight
    Eccentric
  • Adjustments
    Vertical Tracking Angle, Antiskate, Azimuth

Turntable Specifications

  • Playback Speeds
    33-1/3, 45 and 78 rpm
  • Motor Type
    DC Brushless
  • Speed Control
    Electronic w/ braking feature
  • Platter
    Silicon Acrylic
  • Platter Bearing
    Magnetic Suspended Ceramic
  • Signal To Noise Ratio
    41dB - 44dB
  • Wow & Flutter
    0.10% - 0.15%

Connectivity

  • Stereo Outputs Unbalanced
    1

Control

  • Power Control Input
    1
  • Power Control Output
    1
  • Platter Light
    Yes
  • Speed Control Fine Adjustment
    Yes

General Specifications

  • Dust Cover Included
    No

Weights & Dimensions

  • Dimensions (W x H x D)
    17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm)
    Note: Tone Arm Height will vary depending on the type of Cartridge installed.
  • Weight
    42 lbs (19 kg)
  • Shipping Weight
    63 lbs (28.6 kg)