NHT C LCR Center Loudspeakers

• Include this 3-way center speaker in home theater systems for broad dispersion in both horizontal and vertical planes and more comprehensible and detailed sound throughout the seating area. 
• Combining both the previous 2C and 3C centers into a single product, NHT redesigned the cabinet to stand vertically or horizontally to create a powerful front end in a limited-space high output theater system. 
• The C-LCR uses the same 6/5-inch aluminum cone woofers as the C-3 and C-4, as well as the aluminum dome 2-inch midrange and 1-inch tweeter. 
• 4-driver design reduces distortion as the load is spread over multiple drivers.Frequency Response 55Hz-20kHz 
• Housed in a sleek high gloss black enclosure, combine with other NHT C-Series components for an audiophile grade system for home theater. 
• Connector type: 5-way Binding Post 
• Output wattage: 150.0 watts

Sealed Box (Acoustic Suspension) Design 

Every current NHT speaker uses an acoustic suspension speaker design, which means that the speakers have no ports or holes. This superior technique means all NHT bookshelf speaker will offer easy placement in your room, low distortion for fatigue free listening, reliable and accurate operation, as well as easy blending in making exciting and dynamic full-range systems

Premium Aluminum Drivers 

The C Series uses NHT specific aluminum drivers to provide incredible detail, powerful dynamics, and pinpoint imaging for music reproduction or home theater

7 Coats of Hand Polished Paint + 2 Coats of Clear Coat Lacquer Finish 

Each C Series speaker gets the same 7 layer, hand polished, high-gloss black followed by 2 clear coats of lacquer providing easy care and long lasting beauty

5-way Nickel Plated Binding Posts 

NHT speakers come equipped with professional grade, nickel plated 5-way binding posts so that you can use banana plugs, bare wire, or spade lugs to connect your speakers

Specification

Power and Sound

Configuration 3-way Acoustic suspension design

Woofer (2) 6.5” aluminum cone

Midrange 2“ aluminum dome

Tweeter 1” aluminum dome

Frequency Response 55Hz-20kHz

Sensitivity 87dB (2.83v@1m)

Impedance 6 ohms nominal, 4.5 ohms min.

Inputs Nickel plated 5-way binding posts

Recommended Power 75 - 200 w/ch

Dimensions and Finish

System Type Left, Center, Right

Dimensions 7.125" x 21.125" x 9" (H x W x D)

Weight 21.5 lbs.

Magnetic Shield No

Finish High Gloss Black

New Zealand NHT Official Product. Come with NHT Manufactures Warranty.