NHT C4 Floorstanding Loudspeakers

• The C-4 improves on previous NHT tower speakers with a new simplified design. 
• Housed in a much smaller enclosure than other NHT tower speakers, the 4-way C-4 features all front-firing drivers. 
• Eliminate lower frequency sonic issues and general clutter with 2 6.5-inch polypropylene cone woofers, a 6.5-inch polypropylene cone lower midrange, 2-inch aluminum dome midrange, and 1-inch aluminum dome tweeter, all in a single freestanding cabinet. 
• Perfect for a standalone music system, this tower plays louder than its predecessor the NHT Classic Four while requiring far less power to drive. 
• Use in conjunction with the NHT C-3 as surrounds, 2 CS-10 subwoofers and NHT's IC3-ARC for height channels for a jaw-dropping 7.2.4 Atmos/DTS:X system. 
• Connector type: 5-way Binding Post 
• Output wattage: 250.0 watts

Sealed Box (Acoustic Suspension) Design 

Every current NHT speaker uses an acoustic suspension speaker design, which means that the speakers have no ports or holes. This superior technique means all NHT bookshelf speaker will offer easy placement in your room, low distortion for fatigue free listening, reliable and accurate operation, as well as easy blending in making exciting and dynamic full-range systems

Premium Aluminum Drivers 

The C Series uses NHT specific aluminum drivers to provide incredible detail, powerful dynamics, and pinpoint imaging for music reproduction or home theater

7 Coats of Hand Polished Paint + 2 Coats of Clear Coat Lacquer Finish 

Each C Series speaker gets the same 7 layer, hand polished, high-gloss black followed by 2 clear coats of lacquer providing easy care and long lasting beauty

5-way Nickel Plated Binding Posts 

NHT speakers come equipped with professional grade, nickel plated 5-way binding posts so that you can use banana plugs, bare wire, or spade lugs to connect your speakers

Specification

Power and Sound

Configuration4-way acoustic suspension design

Woofer(2) 6.5” aluminum cone

Lower Midrange6.5” aluminum cone

Midrange2“ aluminum dome

Tweeter1” aluminum dome

Frequency Response45Hz-20kHz

Sensitivity86dB (2.83v@1m)Impedance6 ohms nominal, 4 ohms min.

InputsNickel plated 5-way binding posts

Recommended Power75 - 250 w/ch

Dimensions and Finish

System TypeTower Speaker

Dimensions41” x 7.5" x 11.75" (H x W x D)

Weight46.6 lbs.

Base14” x 15" (W x D)

Magnetic ShieldNo

FinishHigh Gloss Black

New Zealand NHT Official Product. Come with NHT Manufactures Warranty.