KEF Q550 Floorstanding Speakers

Q Series takes cutting-edge acoustic technology from ranges including The Reference and Blade to a wider selection of people. Representing exceptional value, Q Series unlocks detail and depth in whatever you choose to listen to.

"Sit anywhere" Uni-Q sound 

The Uni-Q driver array places the tweeter in the centre of the midrange and bass cone, bringing the acoustic ideal of a single point source closer than ever. The result, enhanced by KEF's 'tangerine' waveguide over the tweeter, is a more accurate three-dimensional sound that's dispersed evenly throughout the room.

Tweaking the tweeter 

With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.

A word about drums and bass 

The Q Series reproduces the nuances of bass instruments with ease. With a larger roll surround and new suspension KEF drivers produce cleaner bass at high volumes.  A new cone structure improves midrange clarity and an enhanced Auxiliary Bass Radiator (ABR) with a new surround and rear suspension enhances bass quality.

New system design 

Putting the Uni-Q driver in its own sealed cabinet reduces the load on the cone and increases clarity and detail while delivering cleaner bass. Midrange clarity is enhanced by driver improvements that mean the DC blocking capacitor to be eliminated from the crossover, allowing a more natural roll-off between drivers.

Compact 2.5-way floorstander

The Q550 2.5-way is far more capable than its compact size might suggest, delivering wide bandwidth and full scale with ease. With the KEF signature Uni-Q driver, a 130mm (5.25 inch) aluminium bass driver and two matching ABRs the Q550 delivers phenomenal audiophile performance with clarity and power.

Specifications 

Weight

14.5kg (32 lbs)

Dimension (H x W x D)

873 x 180 x 278 mm
926 x 299 x 310 mm (with Plinth)

Design

2,5-way bass reflex

Unit Measurement

Pair

Sensitivity

87dB (2.83V/1m)

Frequency Range Free Field

45Hz (-6dB)

Frequency Response

58Hz-28kHz (±3dB)

Maximum Output

110dB

Amplifier Requirements

15-130W

Nominal Impedance

8 Ohms (min.3.5 Ohms)

Drive Units

130mm (5.25in.) aluminium Uni-Q
25mm (1in.)vented aluminium dome HF
130mm (5.25in.) aluminium LF
2 x 130mm (5.25in.)aluminium ABR

Crossover Frequencies

2.5kHz

New Zealand KEF Official Product. Come with KEF Manufactures Warranty.