- New
Acoustic Signature Tango Apex NEO Phono Pre Amp
Balanced phono preamp
The new Tango Apex NEO is a balanced phono preamp with a strictly double mono construction. The preamp is designed with an extra housing per channel, a dedicated power supply per channel and a phono amp per channel. All features of the Tango Apex NEO are remote controlled.
100% NZ Official Products
- Come with local NZ warranty
Free Shipping Within NZ
- Anywhere in NZ when purchase over $200
Balanced phono preamp
The new Tango Apex NEO is a balanced phono preamp with a strictly double mono construction. The preamp is designed with an extra housing per channel, a dedicated power supply per channel and a phono amp per channel. All features of the Tango Apex NEO are remote controlled.
Special features:
- 3 inputs: 1 x balanced XLR and 2 x unbalanced RCA
- All signal switching is carried out with ultra high-quality miniature signal relays
- Adjustable gain for each input (individually adjustable): 40 dB, 50 dB, 60 dB and 70 dB
- Input impedance individually adjustable for each input: 47, 100 , 220 , 470 , 1 k, 47 k and all values resulting from parallel connection.
- Input capacitance: basic capacitance approx. <=100 pF, switchable capacitances for unbalanced inputs: 100 pF and 220 pF; Two capacitances can be switched on, resulting in three values (C1, C2, C1+C2)
- Subsonic filter: -24 dB. Operating frequency 20 Hz
- 2 outputs: 1 x XLR and 1 x RCA, maximum output voltage 8.5 V RMS switchable as fixed output or as adjustable output (volume control in 100 steps)
- Built-in headphone amplifier: maximum output voltage 8.5 V RMS
- Power supply unit: separate shunt power supply with 25 VA per channel and one separate power supply with 25 VA for the microprocessor control. Digital control galvanically isolated from the analog power supply.
- S/N: e.g. -73 dB at 60 dB amplification
- Frequency response: +-0.13 dB RIAA equalized
- Distortion factor: 0.06 %
- Crosstalk attenuation: better -90 dB due to double mono design
- Weight: 34 kg
Technical data
| Gain: | 40–70 dB (+ value in <Input Lvl>) |
| MM Input capacity [pF] (47 k): | 100, 220, 320 |
| MC Input impedance []: | 47, 100, 220, 470, 1000, 47000 |
| Outputs (impedance / power): | Unbalanced (RCA), 10 Balanced (XLR), 10 Phones: max. 900 mW (30–250 ) |
| Power supply: | Internal analog power supply for each channel, Input: 115 V or 230 V AC 50/60 Hz (factory setting) Fuse: 2 A @ 115 V / 1 A @ 230 V, slow blow Rated power: 25 W; standby: 0.5 W |
| Channel separation: | > 89 dB (1 kHz) |
| RIAA-accuracy: | ± 0.2 dB(30 Hz–20000 Hz) |
| Distortion: | < 0.01 % |
| Max. output level: | XLR: 6.5 Veff RCA: 6.5 Veff |
| Subsonic filter: | 24 dB at 15 Hz |
| Dimension (WxDxH): | 502 x 337 x 165 mm 19.77 x 13.27 x 6.5 inch |
| Weight: | 34.5 kg 76 lbs |
Available finishes
| Chassis: | Black (anodized), Silver (anodized), Black and silver (anodized), Silver and black (anodized) |
Package contents
- Tango Apex NEO preamplifier
- Power cord
- Instruction manual
Downloads
astangoapex
New
Balanced phono preamp
The new Tango Apex NEO is a balanced phono preamp with a strictly double mono construction. The preamp is designed with an extra housing per channel, a dedicated power supply per channel and a phono amp per channel. All features of the Tango Apex NEO are remote controlled.