Sometimes, pulling cable can be a real pain! AudioQuest’s new FLX/SLiP...
We challenge you to find a speaker in...
sa250mkii
New
The SA250 Mk2 subwoofer amplifier is specifically designed for use with the Custom Installation Series In-wall subwoofers.
0 Item Items
Availability date:
The Bowers & Wilkins Subwoofer Amplifier SA250 Mk2 is specifically designed for use with the Custom Installation Series In-wall subwoofers, the ISW-3 and ISW-4.
Deceptively slim at 3.5inches, and weighing 11.9lb, it provides 250 Watts of power. The SA250 Mk2′s equalisation is custom tailored to the In-wall subwoofers, with a two position EQ switch to select between the ISW-3 and ISW-4.
| Model | SA250 Mk2 |
| Description | 250W rack-mount amplifier with built-in subwoofer equalisation |
| Front panel: | Rotary volume (line in) Rotary low-pass filter frequency (4th-order Linkwitz, 40Hz - 140Hz) Low-pass filter defeat 2-posn switch Phase 0º/180º 2-position switch Bass extension 3-position switch Movie/music EQ 2-position switch On/auto/s |
| Rear panel: | Model select 2-position switch (ISW-3/ISW-4) |
| Amplifier inputs | 2x RCA Phono socket, line in 2x RCA Phono socket, link out 1x XLR socket, line in 1x XLR socket, link out 3.5mm jack - 12V trigger on/standby (overrides manual standby setting) 3.5mm jack - 12V trigger equalisation movie/music |
| Amplifier outputs | 1x Neutrik® Speakon® 4-pole speaker socket 2x pairs of Binding Posts |
| Amplifier power output | 250W |
| Input impedance | 33kΩ |
| Signal / noise | >80dB |
| Rated power consumption | 95W – 1/8 full power 30W – Idling <1W - Standby |
| Height | 100mm (3.9 in) [88.5mm (3.5 in) plus feet] |
| Width | 430mm (16.9 in) |
| Depth | 322mm (12.7 in) |
| Front panel height | 2U 88.1mm (3.5 in) |
| Net weight | 5.4kg (11.9 lb) |
| Finish | Black |
