

The Ortofon DJ Concorde MkII Digital Cartridge is designed to extend the life of timecode vinyl and minimize errors in decoding.
- Come with local NZ warranty
- Anywhere in NZ when purchase over $200
The optimized 10 mV output voltage in the Ortofon DJ Concorde MkII Digital Cartridge maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.
Concorde DIGITAL is available in following configurations:
Stylus Type: Special Elliptical
Tracking Force: 4.0 g
Output Voltage: 10 mV
Frequency Range: 20–18.000 Hz
Output voltage at 1000Hz, 5cm/sec. – 10 mV
Channel balance at 1kHz – 1 dB
Channel separation at 1kHz – 22 dB
Channel separation at 15 kHz – 15 dB
Tracking ability at 315 Hz at recommended tracking force – 100 μm
Compliance, dynamic lateral – 14 μm/m N
Stylus type – Spherical R 18 μm
Tracking force range – 3 – 5 g
Tracking force recommended – 4 g
Internal impedance, DC resistance – 1200 Ohm
Internal inductance – 850 mH
Recommended load resistance – 47 kOhm
Recommended load capacitance – 200-400 pF
Cartridge weight – 18,5 g
Replacement stylus unit – DIGITAL
The Ortofon DJ Concorde MkII Digital Cartridge is designed to extend the life of timecode vinyl and minimize errors in decoding.